Spread the love

I’m starting writing a new section on mobile phone hacking. In my tutorials I will show you how to root phones and perform other magic tricks with them, not available to the average user.

After unlocking the bootloader, we gain unlimited possibilities to interfere with the software of our XIAOMI. For smartphones, we get the ability to change rooms, upload various modifications and root! 🙂

In today’s ROOT release xiaomi Redmi Note 7, a phone extremely resistant to the rooting process and any changes to the soft.

IMPORTANT: This procedure shows complex operations that can damage the device if performed incorrectly. It is recommended to run only by users who have extensive experience in moding. The is not responsible for any damage to the device. This procedure involves formatting your phone and losing all your data as a result: we recommend that you back up.

What we’re going to need:
1. Xiaomi Redmi Note 72 phon
e. USB cable to connect to your computer
3. Installed ADB/XIAOMI drivers for our operating system and phone
4. SD cards (to be placed soft)Software

compatible with Xiaomi Redmi Note 7 download now:- TWRP (v
ersion: 3.4.0-0.lavender)- Offi
cial miui system image LAVENDEER GLOBAL (version: V11.0.1.0)- M
AGISK MANAGER (version: 8.0.3)

After downloading the downloaded files, place the downloaded files on the SD card tha

t we will insert into your phone. Then, to support ROOT and install the necessary software, we will need a set of tools that we download to the computer disk and from which we will support most of the pr


Unpack the downloaded package into a folder on the disk. Then throw the TWRP file into it. The

next stage is the installation of ADB and USB drivers for Xiaomi devices:

Xiaomi USB drivers to download for Windows:

Xiaomi VCOM Drivers (mediatek device)Windows 10, Windows 8.1, Windows 8, Windows 7 (32/64-bit)
Xiaomi CDC Drivers (mediatek device)Windows 10, Windows 8.1, Windows 8, Windows 7 (32/64-bit)
Xiaomi USB Drivers (qualcomm snapdragon device)Windows 10, Windows 8.1, Windows 8, Windows 7 (32/64-bit)
Just in case, we recommend installing all three drivers.

The tutorial and the drivers can be found at this address.

XIAOMI REDMI NOTE 7 requires unlocking the booloader using the MI account. The procedure for unlocking the bootloader is described in the additional tutorial available here: Unlocking the Xiaomi Redmi Note 7 Bootloader

The first stage of rooting Xiaomi is to enable programming options:We click
7x “MIUI version” in the “About Phone” menu until the message “All right, you are already a programmer” appears

This image has an empty alt attribute; its file name is

Screenshot of Xiaomi Redmi Note 7 – bootloader unlock

Then, in the “Additional Options/Programming Options” menu, select “OEM unlock” and “USB Debugging

Then, in the “Additional Options/Programming Options” menu, select “OEM unlock” and “USB Debugging

After completing the above steps, we insert the SD card into our Xiaomi Redmi Note 7 in order to start building and move on to the correct procedure.

Then we go to our folder with windows 10 toolkit download here (composition: ADB, FASTBOOT) and TWRP inside this folder. Press the left Shift and right mouse button and select “Open powershell window here”

Then, in the PowerShell terminal, type the command:

 adb reboot bootloader

After entering the procedure Xiaomi Redmi 7 will reset and go into Fastboot mode.I
n order to check the correct connection of the phone to the computer we type:

 fastboot devices

If our eye is found to be the following information:

This image has an empty alt attribute; its file name is terminal-fastboot-1024x548.jpeg
Fastboot Terminal

This means that the whole procedure so far has been performed corre
ctly :-)Then type:

fastboot flash recovery twrp-3.4.0-0-lavender.img

The TWRP upload procedure is performed correctly.

Note! We do not turn off the phone manually now!

NOW press the power key and volume key + together and wait for the TWRP to start.

The TWRP menu will now be released to our eyes:

Now we follow the instructions: “In
stall > Select Storage > Micro SD > Insall Zip > find the file:
ALklikamy on it and then drag the bottom bar … and the system is installed.


The final and key stage is the installation of Magisk Manager.
1. We can download it from the play store.
2. Then we install ZArchiver from the Play.3 Stor
e. With The Android File Manager, we go to the SD card and select our MIUI LAVEENDER GLOBAL ROM image and open it using the “Preview” app from Archer. We select the boot.img file and perform extraction on the SD card.

4. We open Magisk Manager, then select the option “Select package and latch
5. We select our boot.img file. from the SD card and click “We’re starting”

5. Then we find the file created by MAGISK MANAGER. It is called “magisk_patched.img“. We copy the file to the SD card and disable our Xiaomi.
6. We return to Fastboot – we turn it on with two pins: power and the volume at the wheel.

After restarting the phone in Fastboot mode, we repeat the command:

fastboot flash recovery twrp-3.4.0-0-lavender.img

7. We switch the phone using the power button together with the louder volume button (two buttons pressed together) to re-enter the TWRP.

Overview manual for fastboot and TWRP startup process

8. After entering twrp we find our file magisk_patched.img on the SD ca
rd. Click install image ….

And ready, after resetting the phone, we check the root:

… The end


Leave a Reply

Your email address will not be published. Required fields are marked *